Skip to main content

Women’s RF1 3/2mm

Return to Previous Page

For warm waters

2/3mm

Neoprene

Freediving

A More OceanPositive Neoprene

Limestone Neoprene

During the neoprene production process, limestone is used to replace petrochemicals to form rubber chips. You achieve the same performance as traditional neoprene, but with way less environmental impact.

Recycled Rubber

One of the key ingredients of neoprene, Eco Carbon Black, is recycled by our wetsuit factory from post-consumer scrap tyres. This significantly reduces energy consumption and cuts CO2 emissions by 200g per wetsuit.

Dope-Dyed Yarn

The yarn in this garment is dope-dyed, a process of infusing dye pigments into a molten plastic solution to produce coloured yarns. This saves vast amounts of water whilst reducing energy consumption and water pollution.

After the neoprene creation process, the redundant trimmed materials will be recycled and reused in the mixing process to produce more neoprene sheets. Overall huge amounts of raw materials are saved, energy consumption is reduced and waste water and air emissions are minimised during production.

BE WARM

The innovative construction of the double neck system means water flush through the suit is dramatically reduced, keeping you warmer for longer. The inner Hydrolock neck seal sits in lower profile to the outer neck seal, allowing two seals to be created against the skin. The back zip is a Blackout zip, with reshaped teeth pieces that eliminate gaps and stop water running through.

BE ADVENTUROUS

This suit has been tried and tested by some of our most adventurous freedivers. The outer panels have been carefully considered to minimise damage when taking the suit on and off, with the more delicate Smoothskin panels kept to a minimum. Combined with durable linings and knee protection, this makes a freedive suit overall more dependable than most so you can get in the water quicker without worry.

BE FREE

A combination of 3mm neoprene on core areas and 2mm in considered spaces, enables this suit to achieve maximum flexibility without sacrificing its thermal properties. The Smoothskin panels on the shoulders and sides of the legs give even more stretch to these areas of the body, letting you move without difficulty through the water.

BE IN THE MOMENT

Rf1 Logo White

GLIDESKIN

You’ll find Glideskin panels on the outside of the garment. Glideskin has a hydrophilic coating on top of the smooth surface. The coating applied to the Glideskin makes it easy to glide through the water due to low friction.

SMOOTHSKIN

The panels on the inside of the RF1 suit at the ankle, wrist and neck seals are made with Smoothskin. Smoothskin has no coating and takes on a ‘sticky’ property once wet, creating a great seal between itself and the diver’s skin.

BE IN FOR LONGER

Pair the RF1 suit with the RF Vest to gain an extra 3mm of thermal protection on the core and the head. Perfect for extended time in cooler waters, further minimising suit flush.

You can add any HTML here (admin -> Theme Options -> Promo Popup). We suggest you create a static block and put it here using shortcode